FAQs

ArtRage Background 9 ArtRage Tools Overlay

Frequently Asked Questions

If you are experiencing problems with ArtRage not reacting to the pressure of you strokes or not painting at all when using a stylus please follow the troubleshooting steps below. For any other problem please Contact us and we’d be happy to help.

Checking ArtRage Input Settings for Stylus Type.

ArtRage supports two different types of tablet input on Windows: The older ‘Wintab’ standard, and the newer ‘Realtime Stylus’ standard. In many cases where the stylus is not producing pressure changes or is not producing paint at all having support for both of these turned on at once can be the cause, so they can be turned off independently.

Follow these steps to change ArtRage input settings:

  1. Open the ArtRage Preferences panel from the Edit menu and locate the ‘Input’ section.
  2. Make sure ‘Use Wintab’ is turned on and ‘Use Realtime Stylus’ is turned off.
  3. Click OK and restart ArtRage.
  4. If the problem persists, return to the Preferences panel and turn ‘Use Wintab’ off, and turn ‘Use Realtime Stylus’ on.
  5. Click OK and restart ArtRage.

This tests whether the problem was caused by ArtRage incorrectly handling information when both standards were supported. If it does not solve the problem, please do the following:

  1. Make sure that any drivers for your tablet are up to date.
  2. Contact us and let us know what version of Windows you are using, what type of input device you are using, and exactly what the problem is.

ArtRage supports the two common driver standards for Windows, WinTab and RealTime Stylus. This are the programs that ensure the tablet or touchscreen works properly with ArtRage, allowing you to draw with it.

ArtRage also supports the ‘Precise Tablet’ setting: a high resolution input mode that creates more precise strokes.

Normally, Wintab is supported by desktop-based graphics tablets like the Intuos range, and RealTime Stylus is supported by touchscreen devices. However, it is possible for a specific device to be using the other kind of driver, or to be sending bad data that tells ArtRage it supports Precise Tablet mode, or the opposite tablet driver.

If you are seeing issues with the tablet drivers (e.g. pressure issues, freezes, trouble drawing properly, lag, crashes), the first step is to change the input settings in ArtRage. Sometimes ArtRage is getting conflicting information and only a certain combination of options will work.

Open ArtRage and go to Edit > ArtRage Preferences > Input Settings.

  1. Make sure that Wintab is ON and Precise Tablet and RealTime Stylus are turned OFF.
  2. Restart ArtRage and test.
  3. If that doesn’t help, turn Wintab OFF and RealTime Stylus ON
  4. Restart ArtRage and test


We also recommend disabling the Windows Ink setting if you are seeing problems, as it can interfere with other programs.

  1. Go to Start > Wacom Tablet > Wacom Tablet Properties > Mapping tab
  2. Uncheck “Use Windows Ink” in the bottom left corner


If you are seeing strange behaviour with the menus, or can only use the menus and not draw on the canvas, or are seeing strange zooming, ‘right click’, or unexplainable behaviours, check Press & Hold for Right Click. This is a tablet and touch input setting that can conflict with tablet drivers and software in strange ways.

  1. Go to your Control Panel > Pen and Touch > Change touch input settings
  2. Disable or enable ‘press and hold’ (whichever it currently is, change it)


If you are still seeing problems after this, you should:

  • Check that your tablet drivers are up to date
  • See if the same problems appear when only using a mouse or in Safe Mode or with your tablet driver disabled (if they do, it probably isn’t the tablet driver)
  • Contact us for help troubleshooting the problem.

I’m getting strange behavior / no pressure support when using my graphics tablet with ArtRage

If you’re using ArtRage on Windows and see strange behaviour when using a graphics tablet, try the following: Check that you have the latest version of ArtRage ( Help -> Check for updates online ). If not, download the latest version of ArtRage from our Member Area. Download and install the latest version of tablet software from your tablet manufacturer’s website. If you still have problems, please contact us via the support page so that we can help.

When I start ArtRage 2 Wacom Edition I get: ‘This application will only run on a Wacom tablet’

The way that Wacom tablets are identified changed in recent operating systems, so you may see this error when starting ArtRage.Downloading and installing the latest tablet software from Wacom’s website should correct this, but as we removed the tablet check in Artrage 2.5.20 it is also worthwhile downloading the latest version of ArtRage from our Members Area.

Load More

← FAQs